Categories
Martin Lighting 90280080
|
Qty. | Login to see stock. | Login to buy |
Marin Lighting 90280080
Compact Single Lens Wash Light with RGBW Color Mixing
The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.
• Bright LED moving head wash light.
• 12 x 10 W RGBW LEDs.
• Single-lens wash with fully premixed color.
Key Features
• 12 x 10 W Osram Ostar RGBW LED’s.
• Single-lens wash with fully premixed color.
• 2,000 lumen output.
• 10°–60° zoom.
• 32 pre-built color macros.
• Temperature-controlled cooling system.
• Digital display menu.
• PowerCON in and through.
• 3 and 5-pin DMX options.
Specifications
Physical
• Length: 290 mm (11.4 in.)
• Width: 189 mm (7.4 in.)
• Height: 360 mm (14.2 in.)
• Weight: 7.1 kg (15.7 lbs.)
Dynamic Effects
• Electronic Dimming: 0 - 100%, four dimming curve options
• Strobe and Pulse Effects: Variable speed and action, random strobe
• Color Mixing: RGBW
• Color Presets: 36 color presets plus full white, ‘color wheel’ effects
• Electronic Shutter Effect: Instant open and blackout
• Zoom: Motorized
• Pan: 540°
• Tilt: 200°
Control and Programming
• Control Options: DMX
• 16-Bit Fine Control: Dimming, pan and tilt
• White Balance Control: RGB adjustment
• DMX Channels: 14
• DMX Address Setting: Control panel with LCD display
• DMX Compliance: USITT DMX512/1990
Optics
• Zoom Range: 10° - 60°
• Light Source: 12 x 10 W RGBW Osram Ostar LEDs
• Minimum LED Lifetime: 50,000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions.
Construction
• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Ingress Protection Rating: IP20
Installation
• Minimum Clearance Around Fan and Air Vents: 100 mm (4 in.)
• Mounting Points: One quarterâ€turn bracket for rigging clamp
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum Distance to Combustible Materials: 100 mm (4 in.)
• Minimum Distance to Illuminated Surfaces: 200 mm (8 in.)
Connections
• AC Power In, Thru: Neutrik PowerCon
• DMX Data In, Thru: 3-pin and 5-pin locking XLR
Electrical
• AC Power: 100-240 V nominal, 50/60 Hz
• Power Supply Unit: Auto-ranging electronic switch mode
• Fuse: T 3.15 A
• Typical Half-Cycle RMS Inrush Current: 11.3 A (at 240 VAC)
• Recommended Miniature Circuit Breaker: Type D*
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
• 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
• 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
• Cooling: Forced air (temperature-regulated, low noise)
• Maximum Ambient Temperature (Ta max.): 40° C (104° F)
• Minimum Ambient Temperature (Ta min.): 0° C (32° F)
Approvals
• EU Safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
• US Safety: UL 1573, UL 8750
• US EMC: CFR Title 47 Part 15
• Canadian Safety: CSA C22.2 No. 166
• Australia/NZ: C-TICK N4241 / RCM
Included Items
• Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
• Omega bracket for rigging clamp attachment
Accessories
Cables
• Power Input Cable, AWG 14, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon Input Connector, 3 m (9.8 ft.): P/N 11541508
• Power Relay Cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon Connectors, 1.4 m (4.6 ft.): P/N 11541509
• Power Relay Cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon Connectors, 2.25 m (7.4 ft.): P/N 11541510
• Power Relay Cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon Connectors, 3.25 m (10.7 ft.): P/N 11541511
DMX link
• DMX Termination Plug, 3-Pin Male XLR: P/N 91613017
Power Connectors
• Neutrik PowerCon NAC3FCA Power Input Connector, Cable Mount, Blue: P/N 05342804
• Neutrik PowerCon NAC3FCB Power Output Connector, Cable Mount, Light Grey: P/N 05342805
Installation Hardware
• Half-Coupler Clamp: P/N 91602005
• G-Clamp: P/N 91602003
• Quick-Trigger Clamp: P/N 91602007
• Safety Cable, Safe Working Load 50Kg: P/N 91604003
EAN # : 5706681224456